RIGOROUSLY TESTED. TECHNOLOGICALLY ADVANCED.
Alloy Cored Wire
We understand steel, how it reacts with various alloys, and how we can change the chemistry to our customers' desires.
Discover the Advantages of Cored Wire from P.C. Campana
Alloy cored wire offers numerous metallurgical advantages that make steel mill and foundry processes more efficient – due to deep release of the selected alloy into the liquid melt (below the slag layer).
- Alloy powders that have a high affinity for oxygen are recovered in the melt at higher percentages. (Al, Ti, Ca, Mg)
- Light in weight alloys (relative to the melt it is added into) also recover at higher percentages (Al, Ti)
- Precise alloy added weight (compared with bulk alloy additions) helps liquid metal processors to hit ever tighter chemistry ranges contributing to:
- Lighter parts for the ultimate parts maker
- More precise mechanical properties for the ultimate parts makers
- Savings on worker injuries by reducing manual bag additions
- Extreme cost savings - especially with the MegaCal JC-XO
- P.C. Campana wire is delivered on steel pallets that the company fabricates in its Lorain facility (instead of problematic, wasteful wooden pallets); Learn more about our Steel Pallets.
- Uncommon wire compositions readily available:Ferro Niobium, Titanium sponge, and Low Aluminum Ferro Titanium, Selenium, Bismuth, Nitrided Vanadium9 mm | 13 mm | 16 mm | 21 mm
Get mega cost savings with the MegaCal JC-XO
Our proprietary, patented, ultralow reactivity extruded rod calcium wire will deliver extreme cost savings:
- Maintain your current ladle freeboard level and virtually eliminate steel splash and associated maintenance and cleanup costs.
Burned up transfer car motors/power lines and extensive steel splash clean up on LMF roof underside, ladle car tracks/pits etc.
- Maintain your current steel splash level and reduce freeboard increasing tons/heat melted and cast. This goes directly to your bottom line.
"Many steelmakers fail to add up the true total costs of submerged lance feeding, including but not limited to: consumable lance tips, argon gas, labor and handling, safety issues and multiple production delays. We welcome the opportunity to run a trial at any steel mill to prove the superior value of our JC-XO."
Paul Kelly, Vice President & General Manager
P.C. Campana wire is delivered on steel pallets that the company fabricates in its Lorain facility.
“We are the only manufacturer that makes all-steel pallets and the tubing used for shipping our products; our competitors use wood.”
Pat Campana Jr., President & CEO
Wooden pallets are subject to breakage, which can render spilled wire unusable. They are also problematic because they decompose around busy steelyards unless they are hauled from the property, an added expense.
“Our pallets serve multiple purposes,” says Kelly. “Steel is durable and can survive significantly more abuse than a wooden or plastic skid.”
Paul Kelly, Vice President & General Manager
Additionally, environmental waste is minimized. Workers can toss the steel pallets into the ladle to melt or recycle them for another purpose.
“Initially, new customers offer to return them and are surprised we don’t ask for them back,” says Kobylarz. “There are some creative guys in the mills who will make them into shelving or something useful.”
ALLOY CORED WIRE PRODUCTS
Explore our expansive line of products below or chat with one of our cored wire experts.
| Alloy | Wire Size | Alloy WPF | Alloy Wt | Gross Weight | Length | Typical Composition |
|---|---|---|---|---|---|---|
| Aluminum | .500" | 0.21 | 5,040 | 5,140 | 24,000 | Al-99.5% min, Mg-.05 max, Cu-.25% max, Zn-.25% max |
| Antimony | 13mm | 0.400 | 4,400 | 5,800 | 11,000 | Sb-99%, As-.15% max, Pb-.20 max |
| Bismuth | 13mm | 0.520 | 2,600 | 3,200 | 4,800 | BI - 99% min, Calcium Carbonate - Balance |
| Bismuth | 16mm | 0.830 | 2,600 | 3,070 | 3,130 | BI - 99% min, Calcium Carbonate - Balance |
| CaCnTech | 16mm | 0.160 | 1,375 | 2,700 | 8,600 | Upon Request |
| CaCn | 16mm | 0.160 | 1,375 | 2,700 | 8,600 | CaCN2-66% min, C(free)-12% min, H2O(comb)-0.5%max, C(total) 22.5% max, Ca 33% max, N 3% max |
| CaCn | 16mm Super | 0.160 | 2,480 | 4,900 | 15,500 | CaCN2-66% min, C(free)-12% min, H2O(comb)-0.5%max, C(total) 22.5% max, Ca 33% max, N 3% max |
| Caldo Carbon | 21mm | 0.205 | 1,330 | 3,200 | 6,500 | C - 98.5% min, S - 1.0% max |
| Carbon | 13mm | 0.104 | 1,145 | 2,905 | 11,000 | C - 98.5% min, S - 1.0% max, Ash - 0.50% max, Volatiles - 0.50% max, Moisture - 0.50% max |
| Carbon | 13mm Super | 0.104 | 2,025 | 5,145 | 19,500 | C - 98.5% min, S - 1.0% max, Ash - 0.50% max, Volatiles - 0.50% max, Moisture - 0.50% max |
| Carbon | 16mm | 0.155 | 1,330 | 2,920 | 8,600 | C - 98.5% min, S - 1.0% max, Ash - 0.50% max, Volatiles - 0.50% max, Moisture - 0.50% max |
| Carbon | 16mm Super | 0.155 | 2,400 | 4,990 | 15,500 | C - 98.5% min, S - 1.0% max, Ash - 0.50% max, Volatiles - 0.50% max, Moisture - 0.50% max |
| Carbon | 21mm | 0.224 | 2,130 | 4,170 | 9,500 | C - 98.5% min, S - 1.0% max, Ash - 0.50% max, Volatiles - 0.50% max, Moisture - 0.50% max |
| Carbon | 21mm Super | 0.224 | 2,350 | 4,450 | 10,500 | C - 98.5% min, S - 1.0% max, Ash - 0.50% max, Volatiles - 0.50% max, Moisture - 0.50% max |
| HS Carbon | 13mm | 0.104 | 1,145 | 2,905 | 11,000 | C - 98.5% min, S - 2.2% max, Moisture - 0.50% max |
| HS Carbon | 13mm Super | 0.104 | 2,025 | 5,145 | 19,500 | C - 98.5% min, S - 2.2% max, Moisture - 0.50% max |
| HS Carbon | 16mm | 0.155 | 1,330 | 2,920 | 8,600 | C - 98.5% min, S - 2.2% max, Moisture - 0.50% max |
| HS Carbon | 16mm Super | 0.155 | 2,400 | 4,990 | 15,500 | C - 98.5% min, S - 2.2% max, Moisture - 0.50% max |
| HS Carbon | 21mm | 0.224 | 2,130 | 4,170 | 9,500 | C - 98.5% min, S - 2.2% max, Moisture - 0.50% max |
| HS Carbon | 21mm Super | 0.224 | 2,350 | 4,450 | 10,500 | C - 98.5% min, S - 2.2% max, Moisture - 0.50% max |
| LS Carbon | 13mm | 0.104 | 1,145 | 2,905 | 11,000 | C - 98.5% min, S - 0.50% max, Ash - 1.00% max, Volatiles - 0.50% max, Moisture - 0.50% max, Hydrogen - .10 % max |
| LS Carbon | 13mm Super | 0.104 | 2,025 | 5,150 | 19,500 | C - 98.5% min, S - 0.50% max, Ash - 1.00% max, Volatiles - 0.50% max, Moisture - 0.50% max, Hydrogen - .10 % max |
| LS Carbon | 16mm | 0.155 | 1,300 | 2,600 | 8,500 | C - 98.5% min, S - 0.50% max, Ash - 1.00% max, Volatiles - 0.50% max, Moisture - 0.50% max, Hydrogen - .10 % max |
| LS Carbon | 16mm Super | 0.155 | 2,400 | 4,990 | 15,500 | C - 98.5% min, S - 0.50% max, Ash - 1.00% max, Volatiles - 0.50% max, Moisture - 0.50% max, Hydrogen - .10 % max |
| CaSiBa | 13mm | 0.168 | 1,500 | 2,700 | 9,000 | CaSiBa - 30.5%, Mg - 3.0%, SICA - 66.5% |
| CaSi HG | 16mm | 0.225 | 1,935 | 5,000 | 8,600 | Ca - 28.0%-32.0%, Si - 58.0% - 62.0%, Al - 1.50% max, C -1.00% max, Fe - 5.00% max |
| CaSi HG | 16mm Super | 0.225 | 3,500 | 6,600 | 15,500 | Ca - 28.0%-32.0%, Si - 58.0% - 62.0%, Al - 1.50% max, C -1.00% max, Fe - 5.00% max |
| CaSi | 13mm | 0.160 | 1,880 | 3,500 | 12,000 | Ca - 28.0%-32.0%, Si - 58.0% - 62.0%, Al - 1.50% max, C -1.00% max, Fe - 5.00% max |
| CaSi | 13mm Super | 0.160 | 3,560 | 6,500 | 22,000 | Ca - 28.0%-32.0%, Si - 58.0% - 62.0%, Al - 1.50% max, C -1.00% max, Fe - 5.00% max |
| CaSi | 16mm | 0.225 | 1,935 | 3,270 | 8,600 | Ca - 28.0%-32.0%, Si - 58.0% - 62.0%, Al - 1.50% max, C -1.00% max, Fe - 5.00% max |
| CaSi | 16mm Super | 0.225 | 3,490 | 6,000 | 15,500 | Ca - 28.0%-32.0%, Si - 58.0% - 62.0%, Al - 1.50% max, C -1.00% max, Fe - 5.00% max |
| CaSi | 21mm | 0.325 | 2,100 | 3,200 | 6,500 | Ca - 28.0%-32.0%, Si - 58.0% - 62.0%, Al - 1.50% max, C -1.00% max, Fe - 5.00% max |
| CaSi | 21mm Super | 0.325 | 3,575 | 6,000 | 11,000 | Ca - 28.0%-32.0%, Si - 58.0% - 62.0%, Al - 1.50% max, C -1.00% max, Fe - 5.00% max |
| ELMn | 13mm | 0.500 | 4,000 | 5,480 | 8,000 | Mn-99.5% min, N-.02% max, Fe-.05% max,C-.01% max, Si-.01% max |
| FeBoron 6% | 16mm | 0.575 | 4,300 | 5,475 | 7,500 | B-6% max, Al-.50% max, C-1.50% max, Si-2.0% min, Fe-Balance |
| FeBoron 9% | 13mm | 0.410 | 4,525 | 5,830 | 11,000 | B-9.0%, Al-.50% max, C-1.50% max, Si-2.0% min, Fe-Balance |
| FeBoron 12% | 16mm | 0.550 | 4,125 | 5,300 | 7,500 | B-11.5%-13.5%, Al-.50% max, C-1.50% max, Si-2.0% min, Fe-Balance |
| FeBoron 18% | 13mm | 0.390 | 4,290 | 5,680 | 11,000 | B-17.5%-19.0%, Al-.50% max, C-1.50% max, Si-2.0% min, Fe-Balance |
| FeBoron 18% | 16mm | 0.530 | 4,500 | 5,825 | 8,500 | B-17.5%-19.0%, Al-.50% max, C-1.50% max, Si-2.0% min, Fe-Balance |
| FeCa 7.5mm | 13mm | 0.377 | 4,150 | 5,500 | 11,000 | Ca-11.0%-13.0%, Fe-Balance |
| FeCa 8.5mm | 13mm | 0.302 | 3,350 | 4,900 | 11,000 | Ca-17.0%-21.0%, Fe-Balance |
| FeCb | 13mm | 0.510 | 3,570 | 4,690 | 7,000 | Cb-63.0%-67.0%, C-.50%, S-.10 max, Si-3.0% max, Al-2.0%max, Fe-Balance |
| FeCb | 16mm | 0.657 | 5,486 | 7,031 | 8,350 | Cb-63.0%-67.0%, C-.50%, S-.10 max, Si-3.0% max, Al-2.0%max, Fe-Balance |
| FeCr | 16mm | 0.537 | 4,560 | 5,880 | 8,500 | Cr-56.0%-62.0%, C-8.50% max, Si-3.0% max, Fe-Balance |
| FeMn | 16mm | 0.505 | 4,160 | 5,280 | 8,000 | Mn-75.0%, C-7.50% max, Si-1.50% max, Fe-Balance |
| FeMo | 13mm | 0.520 | 4,420 | 5,505 | 8,500 | Mo-60-73%, Cu-.50% max, S-.20% max, Si-1.5% max, Al-.10% max, Fe-Balance |
| FePhos | 16mm | 0.460 | 3,910 | 5,065 | 8,500 | P-22-28%, C-.05% max, Si-5% max, Mn-3% max |
| FePhos | 21mm | 0.758 | 3,790 | 4,700 | 5,000 | P-22-28%, C-.05% max, Si-5% max, Mn-3% max |
| FeSi(Foundry) | 16mm | 0.230 | 1,980 | 3,270 | 8,600 | Si-74-78%, Ca-1% min, C-.10% max, Al-1.5%max, Fe-Balance |
| FeSi(Foundry) | 16mm Super | 0.230 | 3,645 | 5,890 | 15,500 | Si-74-78%, Ca-1% min, C-.10% max, Al-1.5%max, Fe-Balance |
| FeTi | 13mm | 0.270 | 3,100 | 4,500 | 11,500 | Ti-68-72%, C-.25% max, Si-.50% max, Al-5.0% max, N-.5 max, V-3.0% max, Fe-Balance |
| FeTi | 16mm | 0.382 | 3,250 | 4,565 | 8,500 | Ti-68-72%, C-.25% max, Si-.50% max, Al-5.0% max, N-.5 max, V-3.0% max, Fe-Balance |
| FeTi | 21mm | 0.572 | 3,700 | 4,800 | 6,500 | Ti-68-72%, C-.25% max, Si-.50% max, Al-5.0% max, N-.5 max, V-3.0% max, Fe-Balance |
| LAlFeTi | 13mm | 0.274 | 3,150 | 4,550 | 11,500 | Ti-68-75%, Al-.50% max, C-.15% max, V-.50% max, Si-.25% max, Fe-Balance, Zr-.50% max, Sn-1.0% max |
| LAlFeTi | 16mm | 0.395 | 3,075 | 4,350 | 8,500 | Ti-68-75%, Al-.50% max, C-.15% max, V-.50% max, Si-.25% max, Fe-Balance, Zr-.50% max, Sn-1.0% max |
| Iron Pyrite | 13mm | 0.241 | 2,990 | 4,350 | 11,000 | S-47.5-53.5%, Fe-Balance |
| FeVanadium | 13mm | 0.350 | 3,700 | 5,000 | 10,500 | V-75-85%, C-.75% max, Si-1.5% max Al-2% max, S-.08% max P-.08% max |
| Mega-Cal JC-XO 6.7 | 9mm | 0.035 | 960 | 3,945 | 24,000 | Ca-98.5%, Al-.50% max, Mg, .50% max, Wood Flour-.004-.007 PPF |
| Mega-Cal JC-XO 7.5 | 9mm | 0.046 | 1,195 | 4,195 | 24,000 | Ca-98.5%, Al-.50% max, Mg, .50% max, Wood Flour-.004-.007 PPF |
| Mega-Cal JC-XO 7.5 | 9mm Super | 0.046 | 1,435 | 4,950 | 32,000 | Ca-98.5%, Al-.50% max, Mg, .50% max, Wood Flour-.004-.007 PPF |
| Mega-Cal 6.7HG | 9mm | 0.035 | 840 | 3,825 | 24,000 | Ca-98.5%, Al-.50% max, Mg, .50% max |
| Mega-Cal 7.5HG | 9mm | 0.046 | 1,075 | 4,075 | 24,000 | Ca-98.5%, Al-.50% max, Mg, .50% max |
| Mega-Cal 8.5HG | 9mm | 0.056 | 1,350 | 4,550 | 24,000 | Ca-98.5%, Al-.50% max, Mg, .50% max |
| Mega-Cal 7.5RG | 9mm | 0.046 | 1,100 | 3,200 | 24,000 | Ca-98.5%, Al-.50% max, Mg, .50% max |
| Mega-Cal 7.5RG | 9mm | 0.056 | 1,350 | 3,500 | 24,000 | Ca-98.5%, Al-.50% max, Mg, .50% max |
| Mega-Cal Ultra | 9mm | 0.046 | 1,075 | 4,655 | 24,000 | Ca-98.5%, Al-.50% max, Mg, .50% max |
| MgFeSi 30/70 | 13mm | 0.159 | 1,540 | 2,900 | 10,500 | Mg-28-32%, FeSi-Balance |
| MCFeMn | 13mm | 0.438 | 4,490 | 5,850 | 11,000 | Mn - 78.0%-83%, C - 1.50% max, Si - 1.50% max, Fe - Balance |
| MCFeMn | 16mm | 0.622 | 4,950 | 6,250 | 8,600 | Mn - 78.0%-83%, C - 1.50% max, Si - 1.50% max, Fe - Balance |
| LCFeCr | 16mm | 0.477 | 4,055 | 5,350 | 8,500 | Cr-67-75%, Si-1.0% max, C-.10% max, P-.03% max, S-.025% max, Fe-Balance |
| LCFeMn | 16mm | 0.574 | 4,950 | 6,250 | 8,600 | Mn-78% min, C-.50% max, Si-1.5% max, P-.25% max, S-.02% max, Fe-Balance |
| Lead | 13mm | 0.600 | 5,100 | 6,150 | 8,500 | Pb-93-95%, Calcium Carbonate - Balance |
| NCFeMn | 13mm | 0.330 | 3,650 | 5,100 | 11,500 | Mn-75-80%, C-1.5% max, Si-1.5% max, N-4.0% min, Fe-Balance |
| NCFeMn | 16mm | 0.486 | 4,125 | 5,450 | 8,500 | Mn-75-80%, C-1.5% max, Si-1.5% max, N-4.0% min, Fe-Balance |
| Nitrovan | 13mm | 0.250 | 2,500 | 3,800 | 10,000 | V-76-81%, C-6.0% max, N-14-18%, Al-.15% TYP |
| NLCFeCr | 16mm | 0.458 | 4,000 | 5,230 | 8,500 | Cr-60-75%, Si-1.0% max, C-.10% max, P-.03% max, S-.025% max, N-8-10% |
| NLCFeCr | 21mm | 0.672 | 3,625 | 4,575 | 5,400 | Cr-60-75%, Si-1.0% max, C-.10% max, P-.03% max, S-.025% max, N-8-10% |
| Selenium | 13mm | 0.263 | 2,500 | 3,675 | 9,500 | Se-99.0% |
| Silicon | 13mm | 0.149 | 1,735 | 3,180 | 11,500 | Si-98% min |
| Silicon | 16mm | 0.189 | 1,625 | 2,960 | 8,600 | Si-98% min |
| Silicon | 16mm Super | 0.189 | 2,925 | 5,325 | 15,500 | Si-98% min |
| Sulfur | 13mm | 0.121 | 1,560 | 3,125 | 12,500 | S-99.5% |
| Sulfur | 13mm Super | 0.121 | 2,360 | 4,895 | 19,500 | S-99.5% |
| Sulfur | 16mm | 0.170 | 1,460 | 2,795 | 8,600 | S-99.5% |
| Sulfur | 16mm Super | 0.170 | 2,675 | 5,000 | 15,500 | S-99.5% |
| Sulfur | 21mm Super | 0.250 | 2,700 | 4,410 | 10,500 | S-99.5% |
| Ti Sponge | 16mm | 0.225 | 1,875 | 3,200 | 8,500 | Ti-98% min, Fe-1.5% max, N-.05% max, C-.20% max, V-.03% max |